No Sync Screen (Test Pattern); Edid Management Menu - Lightware UBEX-PRO20-HDMI-F100 User Manual

 
     
6. Lightware Device Controller (LDC) 6. Lightware Device Controller (LDC)
6.8.2. No Sync Screen (Test Pattern)
The No sync screen feature generates an image which
can be displayed when there is no incoming signal on the
port. The following settings can be set for the Test Pattern
function: #testpattern #nosyncscreen
Mode
▪ Always on: the video output port always transmits the
test pattern.
Auto: the video output port transmits the test pattern
▪
if there is no incoming signal on the selected input
port.
▪ Always off: the test pattern function is disabled, the
video output port transmits the video signal of the
selected input port.
▪ Freeze: the signal freezes at the last video frame on
the sink device (the sink may show a broken frame
either). #freeze
Color
Three ways are available to set the no sync screen color:
▪ Click on the predefined color;
▪ Use the sliders;
▪ Type the RGB code of the color.
When the desired color is selected, press the Set color button to store.
Port Tile
The port tile of the HDMI outputs displays when No sync screen mode
is active.

INFO: No sync screen will be active in the case of connected sink
device to the output port only.
series – Extender Application Mode – User's Manual series – Extender Application Mode – User's Manual
Applied F-series endpoint firmware package: v2.0.0 | Applied R-series endpoint firmware package: v2.0.0 | LDC software: v2.5.9b3
6.9. EDID Management Menu
Advanced EDID Management can be accessed by selecting the EDID Management menu. There are two
panels: left one contains Source EDIDs, right one contains Destination places where the EDIDs can be
emulated or copied. #edid
Control Buttons
Exporting an EDID (save to a
EXPORT
file)
Importing an EDID (load from
IMPORT
a file)
Display EDID Summary
INFO
window
Opening Advanced EDID Editor
EDIT
with the selected EDID
CREATE Opening Easy EDID Creator

EDID Management menu

Transfer button: executing
EDID emulation or copying
Deleting EDID (from User
DELETE SELECTED
memory)
Selecting all memory places
SELECT ALL
in the right panel
Selecting none of the memory
SELECT NONE
places in the right panel
84 84