7.1.1.3.1 Importing/Exporting Parameter File; Figure 17: "Settings" Menu Item Warning Message; Table 53: Buttons In The "Settings" And "Scaling" Menus; Table 54: Buttons In The "Settings" Menu - WAGO 750-451 Manual

WAGO-I/O-SYSTEM 750
750-451 8 AI RTD

7.1.1.3.1 Importing/Exporting Parameter File

Two specific buttons are available to you in the "Settings" and "Scaling" menu
items described below:

Table 53: Buttons in the "Settings" and "Scaling" Menus

Button
[Import]
[Export]
Calibration settings cannot be saved!
Please note that the calibration settings cannot be saved in the parameter file.
Once you have changed the settings and you want to close a dialog, the
following warning message appears:

Figure 17: "Settings" Menu Item Warning Message

Table 54: Buttons in the "Settings" Menu

Button
[Write]
[Don't write]
[Cancel]
Description
Parameter files (.rtd) can be imported with custom settings. A
standard Windows dialog opens to select the source directory.
All settings made in the dialog can be exported to a parameter
file (.rtd). A standard Windows dialog opens to select the
source directory.
Description
The changes settings are applied and the dialog closes.
The changed settings are discarded and the dialog closes.
The warming message is closed.
Commissioning 73
Manual
Version 1.2.0