WAGO I/O System 750/753
750-632 Proportional Valve Module
9
Commissioning
9.1
Configuration and Parameterization with
WAGO-I/O-CHECK
The WAGO-I/O-CHECK software from WAGO Kontakttechnik GmbH & Co. KG
can be used to conveniently and completely configure and parameterize the I/O
module, including:
•
Graphical representation of the bus node
•
Display of the measured values
•
Settings for the application
•
Configuration of the I/O module operating modes
•
Parameterization of ramp generators, valve adjustment, and dither
generators
•
Manual valve positioning
•
Monitoring
WAGO-I/O-CHECK
You can obtain the WAGO-I/O-CHECK software on a CD under Item No.
759-302. This CD contains all the application program files and an explanation.
You can find a description at the internet page at http://www.wago.com
Version 1.3.1, valid from FW/HW-Version 01/01
Commissioning
81
Manual