Commissioning; Configuration And Parameterization With Wago-I/O-Check; Rs-232 / Rs-485 Serial Interface (Configuration Dialog); Figure 17: Parameter Dialog - WAGO 750-652/040-000 Manual

54

Commissioning

8 Commissioning
8.1 Configuration and Parameterization with
WAGO-I/O-CHECK
The serial interface module is configured with the WAGO-I/O-CHECK software.
The software's basic functionality is described separately in the WAGO-I/O-
CHECK documentation.
Component damage due to incorrect voltage level!
Incorrectly selected voltage levels can destroy the device!
Note when switching between operating modes that RS-232 and RS-485 use
different voltage levels.
Switch off connected devices before changing operating modes!
Make sure that devices you connect support the voltage level of the current
operating mode!
8.1.1

RS-232 / RS-485 Serial Interface (Configuration Dialog)

Figure 17: Parameter dialog

The parameter dialog is divided into the following areas:
• Title bar with item and item number of the selected I/O module, info area with
item number, designation, and version number and version date of the I/O
module,
Manual
Version 1.3.0
750-652/040-000 Serial Interface RS-232/RS-485 XTR
WAGO-I/O-SYSTEM 750 XTR