Table of Contents
Advertisement
66
Commissioning
7
Commissioning
7.1
Parameterization with WAGO-I/O-CHECK
The WAGO-I/O-CHECK software from WAGO Kontakttechnik GmbH & Co. KG
can be used to conveniently and completely configure and parameterize the I/O
module. You have the following options:
•
Graphical representation of the bus node
•
Display of the measured values
•
Settings for the application
•
Configuration of the I/O module operating modes
•
Parameterization of module settings, configuration of channel and scaling
settings, calibration of measurement channels
•
Monitoring
WAGO-I/O-CHECK
You can obtain the WAGO-I/O-CHECK software on a CD under Item No. 759-
302. This CD contains all the application program files and an explanation. You
can find a description at the internet page at
Manual
Version 1.2.0
WAGO-I/O-SYSTEM 750
750-451 8 AI RTD
http://www.wago.com
Advertisement
Chapters
Table of Contents
