Voltage Measurement; Figure 17: Connection Example For Voltage Measurement Via U/I Converter At - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-316 TO-PASS® Mobile, 4 AI, Web, MODBUS
5.2.3.2

Voltage Measurement

Voltage measurement can only be performed via U/I transformer!
Voltage measurement cannot be performed via multiplier at the analog inputs,
since the internal resistance of the TO-PASS
input current.
WAGO 857 Series JUMPFLEX Isolation Amplifiers for level conversion may be
used for voltage measurement via TO-PASS
Figure 17: Connection example for voltage measurement via U/I converter at input AI1
Manual
Version 2.0.0
Connect Devices
®
telecontrol module depends on the
®
telecontrol modules.
41