Figure 2-6 Screw Positions; Figure 2-7 Sub-Cover Slide-Out; Figure 2-8 Removing The Sub-Cover - NEC SL1100 Hardware Manual

SL1100
285 mm (11.221")
285 mm (11.221")
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the KSU.
• The screw diameter is 4 mm (0.158") to 4.5 mm (0.177").
3. Push the center of the Sub-Cover and slide it outward.
4. Pull out the Sub-Cover by pushing out the tabs.
2-6
180 mm
(7.087")

Figure 2-6 Screw Positions

Figure 2-7 Sub-Cover Slide-out

Sub-Cover
Tab

Figure 2-8 Removing the Sub-Cover

2.5 mm (0.098") -
3.5 mm (0.138")
Sub-Cover
Tab
ISSUE 1.0
Installation