Acd Scheduling On A Pilot Number Basis - NEC Univerge SV8500 Programming Manual

2.8.2

ACD Scheduling on a Pilot Number basis

This scheduling allows the user to assign holiday calendar and holiday schedule on a pilot number basis. Three
patterns of holiday schedule can be used.
STEP 1: ASYDL -
STEP 2: ACDPLT - Assign the schedule number (1-250) to "WEEKNO" for each pilot number.
M_NO:
CCV/W:
WEEKNO:
Example:
M_NO: 2000
CCV/W:1
WEEKNO:1
STEP 3: ACDWS -Assign the week schedule data.
TN:
SCH:
WEEK:
HOUR, MINUTE: CCV start time Note 2
CCVNO:
CCVSTEP:
When assigning schedules, write the data after sorting.
Note:
STEP 4: ACDHCP - Assign the holiday schedule data to the month in which the schedule data is used.
WEEKNO:
MONTH:
DAY:
SCH:
STEP 5: ACDHSP - Assign the holiday schedule data.
WEEKNO:
SCH:
HOUR, MINUTE: CCV start time
CCVNO:
CCVSTEP:
The same Week day Schedule number (SCH) cannot be set to a different Tenant number (TN).
Note 1:
Assign the following system data for using Holiday Schedule:
SYS 1, Index 869, Bit 1 = 1 (Holiday Schedule on a Pilot Number basis is in service).
Monitor Number
0/1 = CCV/Week Schedule
Schedule Number (1-250)
Tenant number (1-9)
Week day Schedule number (1-250) Note 1
Day of week
MON = Monday
TUE = Tuesday
WED = Wednesday
THU = Thursday
FRI = Friday
SAT = Saturday
SUN = Sunday
CCV no. (1-900)
CCV step no. (1-20)
Schedule Number (1-250)
Month that uses the schedule data (1-12)
Date (1-31)
Schedule Number for the holiday (0-3)
Schedule Number (1-250)
Holiday Schedule number (1-3)
CCV number (1-900)
Start CCV step number (1-20)
CHAPTER 4
M_NO:2100
CCV/W:1
WEEKNO: 100
– 67 –
OFFICE DATA DESIGN