NEC Univerge SV8500 Programming Manual page 243

Hide thumbs Also See for Univerge SV8500:
Table of Contents

Advertisement

P-45A PERSONAL EMERGENCY AND ASSIST - ACD
GENERAL DESCRIPTION
This feature allows an agent to have a designated individual supervisor's number as the destination for an assist re-
quest (personal assist request number) and a designated individual supervisor's number as the destination for an
emergency request (personal emergency request number). If these personal numbers are defined for an agent, then
these numbers will be used instead of the emergency and assist numbers that are defined for a split. If these personal
numbers are not defined, then the request (emergency/assist) will be directed to the supervisor who was designated
for the split. In the latter case, the split is the split in which the agent received the call. This is true for an agent work-
ing in single-split or multi-split mode. Please refer to "MULTI-SPLIT AGENT [M-90]" for related information.
OPERATING PROCEDURE
For these examples, the agent's name will be Molly and the supervisor's name will be Kathey.
To place a personal assistance request:
While on an ACD call, Molly at extension is 4302 presses the ASSIST key. The ASSIST lamp turns on and
1.
ASSIST KATHEY is displayed on the agent's position indicating whose supervisor position is receiving the
call.
2.
The ACD call is placed on hold and an automatic transfer to the designated supervisor is initiated.
3.
The agent hears ringback tone and the supervisor's position is rung.
4.
The assistance call will connect on the supervisor's ACD line and the supervisor's position will display either
ASSIST MOLLY or ASSIST 4302, depending on whether the agent's name is programmed with his or her logon
ID. Please refer to "FLEXIBLE ID CODES-ACD [F-25A]" for more information.
5.
After consulting with the supervisor, one of three things may happen:
a.
The agent may release from the call thereby completing the transfer of the ACD call to the supervisor.
b.
The supervisor may release from the call. This will reconnect the agent and the ACD call.
The agent may press the CONF key and invoke a three-way conference between the supervisor, the agent
c.
and the ACD calling party.
6.
When either the agent or the supervisor disconnects from the assistance call, the ASSIST lamps are extin-
guished and the displays return to their original status.
P-45A PERSONAL EMERGENCY AND ASSIST - ACD
– 227 –

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Univerge sv7000

Table of Contents