NEC Univerge SV8500 Programming Manual page 106

ACDTN, ACDPLT etc. need to be assigned other than the above.
Note:
"CP" and "WAIT" are available when SYS1, INDEX449, b2=1.
Note 1:
"MSGT" is not available when SYS1, INDEX449, b2=1. (Normally assign "0" with that data program-
Note 2:
ming)
If values other than "0" are set to a parameter, an error will occur.
Note 3:
RT No. is assigned by the AIVSL command.
Note 4:
TRK No. is assigned by the AIVSL command.
Note 5:
CHAPTER 4
– 90 –
OFFICE DATA DESIGN