NEC Univerge SV8500 Programming Manual page 367

(b) When ID Code is not Required
START
Log On (Start of work)
When VACANT is displayed, press the LOG ON/OFF key.
The lamp illuminates and HELLO is displayed.
The split name is displayed, then, AUTO ANSWER or MAN ANSWER is displayed according
to the program mode of the split to which the agent belongs, and WORK MODE is displayed.
Press the WORK key.
READY is displayed.
Log Off (End of work)
Press the LOG ON/OFF key.
The lamp goes out, the previous display disappears, and the following messages are displayed.
(a) GOOD BYE
(b) SHIFT 08:02:37 (The time since Log on in hours, minutes and seconds)
(c) ACD CALLS 209 (The number of incoming calls handled)
(d) AVG TALK 01:42.6 (The average time spent with each call in minutes, seconds and tenths
of a second)
(e) T-WORK 01:23:45 (The cumulative amount of time spent in Work Mode during the shift
in hours, minutes and seconds)
(f) T-BREAK 01:02:03 (The cumulative amount of time spent in Break Mode during the shift
in hours, minutes and seconds)
The display returns to VACANT.
END
CHAPTER 7
– 351 –
SYSTEM OPERATIONS