NEC Univerge SV8500 Programming Manual page 331

4. Assignment and Deletion Procedure
These flow diagrams show the procedure used to assign and delete Call Control Vectors.
Figure 6-5 Assigning and Removing Call Control Vectors
START
1
AADT/AADTN
ASDT
2
3 ACDPLT
4 ACDSPL
5 ACDCCV
END
START
ACDCCV
1
ACDSPL
2
3 ACDPLT
ASDT
4
5 AADT/AADTN
END
ACDCCV : Assignment of ACD CCV Data
Assign data for announcement trunks referenced by the CCV.
1
Assign station data for any station referenced by the CCV.
2
3 Assign a pilot number to go to the CCV or to a Week Schedule
that references the CCV.
Assign data for any splits referenced by the CCV.
4
5 Assign the CCV.
WARNING: Some of these may not need to be deleted if being
used by other Splits, CCV, etc.
Remove the CCV.
1
2 Remove the split(s) referenced by the CCV.
Remove the pilot number(s) that go to the CCV or to a Week
3
Schedule that references the CCV.
Remove the station data for any station referenced by the CCV.
4
5 Remove the data for any announcement trunks referenced
by the CCV.
– 315 –
DESCRIPTION