NEC Univerge SV8500 Programming Manual page 100

Recording time
0
64 sec.
128 sec.
240 sec.
Incoming Calls
3. After the announcement starts to be played, Multiple Connection function is provided for six seconds
(fixed). Thus, no tone or music is recorded in the part of
of .
4. Prepare the required number of circuits so that all incoming calls can be connected with the DAT using with
Multiple connection function.
Ex. 16sec. mode (max. 4CHs/card)
0
Circuit 0
Circuit 1
Circuit 2
Circuit 3
Note:
In this case, the DAT that has more than 3 circuits should be used.
6 64 128
(Announcement is completed)
Multiple connection
Single connection
6 12 16 18
CHAPTER 4
(Announcement is completed)
and the message is recorded in the part
22 24 28 34
– 84 –
OFFICE DATA DESIGN
240 (sec.)
(Announcement is completed)
40 (sec.)
Time
: IC calls