NEC Univerge SV8500 Programming Manual page 158

C-68A CALL WAITING INDICATION - LCD DISPLAY/CW LAMP - ACD
PROGRAMMING
STEP 1: AKYD - Assign the CW lamp to the agent/supervisory position
KYN: Key Number
KYI = 1 (Function key)
FKY = 47 (CW lamp)
STEP 2: ACDSPL - Designate the threshold value for changing the lamp status
CWON: Threshold value for CW lamp ON (0-700)
When the number of calls is equal to or exceeds the value, CW lamp lights
CWFL: Threshold value for CW lamp flashing (0-700)
When the number of calls is equal to or exceed the value, CW lamp starts to flash
"0" means the lamp does not light nor flashes.
Note 1:
CWON <CWFL< maximum number of queuing calls
Note 2:
Note 1, Note 2
Note 1, Note 2
– 142 –