Configuring The Library; Addressing Configuration Prerequisites - Quantum Scalar i6000 Installation Manual

This chapter provides step-by-step instructions for configuring the library using the Library Management
Console (LMC). The information in this chapter includes:
• Addressing Configuration Prerequisites
• Logging on to the Library
• Performing Basic Configuration
• Performing Advanced Configuration
• Working with Library Control Paths
• Creating Partitions
• Putting Physical Library and Partitions Online
• Configuring Drive Cleaning
• Saving the Library Configuration
• Logging Off on page 229
Before the library can be used, there is some basic configuration that must be done. Configuration varies
depending on the type of library and the features that will be used. Before configuring the library, you should
review all Technical Bulletins and Release Notes and Errata for the product.
Only one administrator can be logged on and performing library configuration
Note
at any one time. If another administrator attempts to log on, a message
appears, warning that only one administrator at a time is permitted on the
library. If a service user logs on while an administrator or regular users are
logged on, the library automatically logs off those users.

Addressing Configuration Prerequisites

You must obtain the following information from the customer, before configuring the library.
• Proposed IP address of library
• Subnet Mask for local network
• IP address for the gateway on the local subnet
• IP address of the SMTP server
• Access account of SMTP server
Scalar i6000 Installation Guide
on page 153
on page 154
on page 156
on page 163
on page 180
on page 182
on page 223
on page 228

Configuring the Library

on page 220
153