Quantum Scalar i6000 Installation Manual page 191

Non-admin library users also need to be members of the groups that match the
Note
partition names for which they are granted access. These group names needn't
be specifically listed anywhere in the LDAP setup on the library. When user
logins are validated during login, their group memberships for partition access
are validated automatically.
5 To validate your configuration, click OK or Test.
6 Click the Test tab.
You can use the Test functionality to simulate an LDAP login for a specific user and quickly discover
what access rights the user has and to what partitions the user has access.
Test User section
• User: Type the appropriate User name.
• Password: Type the user password.
7 To initiate the library authentication process to the LDAP server, click Test after providing the user name
and password.
A dialog box appears displaying what level of access the user is assigned, and to which library
partition(s) the user has access.
8 After you have entered the LDAP configurations, click Test to verify the LDAP connection.
A connection with the LDAP server(s) is established and the library determines whether the LDAP
Distinguished Names specified in the Access tab are valid.
A message box appears indicating that the success or failure of the LDAP connection.
• If the connection failed, the error message contains information that you can use to resolve the
issue.
Scalar i6000 Installation Guide 179