Quantum Scalar i6000 Installation Manual page 119

9 If you are installing FC I/O blades in the I/O management unit, proceed to
Management Unit on page 108.
If you are not installing FC I/O blades, proceed to
these paths:
• If you are going to directly attach either the FC or SCSI drives to a host, proceed to
and SCSI Drives Directly to Hosts
• If you are connecting the FC drives to I/O blades, you will first follow the instructions in
Blades in the I/O Management Unit
Considerations and How Drive Connection Model Affects Library Control Paths
Make sure you review the information in
Note
for FC Drives
Scalar i6000 Installation Guide
Applying Power
on page 124.
on page 108 and then complete the procedure in
on page 114 before connecting the cables.
Installing Blades in the I/O
on page 93, and then follow one of
Cable Connection Requirements
Attaching FC
Installing
Drive Cabling
on page 112.
107