Quantum Scalar i6000 Installation Manual page 231

4 Click Access.
The Host Access dialog box appears.
5 On the top portion of the screen, expand the HOST LIST folder, and highlight the host you want to
change.
6 From the Select Partition drop down menu, select the appropriate partition.
This action filters the drives in the Drive Access table and show only those drives that belong to the
partition selected. By default all SNW drives will be displayed.
In the Partition Access section, the partitions are displayed.
7 Select drives.
To select all drives in the Drive Access table, click the Select All Drives check box; to select individual
drives, select the check box for each drive.
When a drive check box is selected/unselected the color of the row in the table will change to indicated
the change to the current drive configuration. The colors have the following meaning GREEN (access
will be granted to the host selected in the HOST LIST), YELLOW (access will be denied to the host
selected in the HOST LIST) and WHITE (no change has been made).
The drives that are presented in the Drive Access table have the following characteristics:
• The drives have a SNW license.
Scalar i6000 Installation Guide 219