Configuring The Library - Quantum Scalar i40 User Manual

Quantum Scalar i40 and Scalar i80 User's Guide

Configuring the Library

A Setup Wizard is available to assist you with the initial configuration of
the library. The Setup Wizard, however, contains only a subset of
configuration tasks. The operator panel and Web client menus provide
access to all configuration options that are included in the Setup Wizard
and many that are not.
This chapter covers the Setup Wizard and all of the other configuration
options. Paths to open the appropriate screens on both the operator
panel and the Web client are given for each task. (For complete menu
trees, see Menu Trees
Note: These operations should not be performed concurrently by
multiple administrators logged in from different locations. You
can access the screens, but you cannot apply changes while
another administrator is performing the same operation.
Caution: Always save the library configuration after modifying a
configurable item. This will allow you to restore the most
current settings if necessary. See
Library Configuration
Note: Power cycling (powering the library on and off) is not necessary
to configure the library.
on page 33.)
on page 107.
Chapter 4
Saving and Restoring the
37