Quantum Scalar i6000 Installation Manual page 308

54 Close the I/E stations and all access doors.
55 Press the Power switch on the operator panel.
56 Log on to the library as a service user. See the Scalar i2000 / i6000 Maintenance Guide.
57 From the LMC, run Configure by clicking Tools→ Teach→ Configure.
See the Scalar i6000 User's Guide for more information.
58 After completing the configure process, run Calibrate click Tools→ Teach→ Calibrate.
59 Run a complete Install Verification Test est to verify proper installation by clicking Tools > Verification
Tests > Install. The results appear on the Verification Tests dialog box after the test is complete.
60 If using Auto Teach, make certain to turn this feature back on.
61 You must modify and configure any existing partitions that include resources altered or removed by the
change in the expansion module physical configuration to incorporate the new I/E station.
In the LMC, click Setup→ Partitions→ Configure to modify partitions and create new ones.
See the Scalar i6000 User's Guide for more information about working with partitions.
62 Assign the new I/E station and storage slot in the new access to their appropriate partitions.
63 If the magazines on the access door are assigned to partitions, you must import all the cartridges you
removed from the previous expansion module access door to the appropriate partitions in the new
access door.
64 If there is not enough space for all the cartridges from the previous access door due to the larger I/E
station, reassign the access door's storage slots to appropriate partitions.
65 If appropriate, perform Partitions Defragmentation. Click Tools→ Partitions Defragmentation.
The Partitions Defragmentation dialog box appears. This dialog box shows a graphical representation
of the tape magazines in the library. Magazines are color-coded to indicate which partition they belong
to. If the library has more than one module, click the arrow buttons to display the next or previous
module. If one or more partitions are fragmented, you can defragment them.
66 For more information on the I/E station features, see the Scalar i6000 User's Guide.
296 Adding Optional Hardware