Known Issues ... 6 Firmware Versions ... 8 Documentation... 8 Contacting Quantum... 9 October 2008 Document 6-01378-10 Rev A, Scalar i500® i4 (520G.GS003) Product Microsoft® Internet Explorer 6.0 and later Web Browsers (Remote versions and Mozilla Firefox™ 1.0.6 and later Web Client)
These notes also provide tape drive and auxiliary firmware compatibility information. Visit information about Scalar i500 and previous releases. New Features and Enhancements Scalar i500® i4 (520G.GS003) firmware includes the following new features and enhancements: • •...
Page 3
• SAS Host Bus Adapter and Host Bus Adapter Drivers and drivers (combined) must support SAS standard 1.1 or higher. • —You must run the Library Service Utility prior to Library Service Utility upgrading firmware if you are currently running firmware version 320G.GS004 or 400G.GS006.
October 2008 Compatibility Matrix The following table provides information about library and tape drive firmware compatibility with Scalar i500® i4 (520G.GS003). This information is current as of the publication date of these release notes. Note: You must run the Library Service Utility prior to upgrading firmware if you are currently running firmware version 320G.GS004 or 400G.GS006.
H37Z to H44Z through the FC I/O blade. The upgrade succeeded, but RAS ticket indicates that it failed. Resolution: This release of Scalar i500® i4 (520G.GS003) firmware resolved the following issues. Description The screen saver may not come up on the library after a reboot following Fixed - screen saver now comes up.
If you set the time and the time zone at the same time, the actual time reported by the library may be incorrect (it may be an hour off from the actual time). This release of Scalar i500® i4 (520G.GS003) firmware has the following known issues. Known Issues Workaround Reports >...
Page 7
• The tape cartridge is moved into a tape drive; • The tape cartridge is moved to a storage cell of a partition where there are less than two empty slots in the storage area; or • The cartridge is moved to the I/E station(s) where there are less than two empty slots.
410G.GS007 400G.GS010 Documentation pertaining to this product is located at: http://www.quantum.com/ServiceandSupport/ SoftwareandDocumentationDownloads/SI500/Index.aspx#Documentation To order a copy of the source code covered by the Open Source Licenses, contact the Quantum Technical Assistance Center. Refer to Firmware Versions Board Support Package (BSP) UDS Firmware 6.66...
Made in the USA. Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this publication from time to time without notice.
Need help?
Do you have a question about the Scalar i500 and is the answer not in the manual?
Questions and answers