Scsi Host Lun Mapping - Quantum Scalar i6000 Installation Manual

SCSI Host LUN Mapping

During device discovery, a particular partition or drive may map to a higher LUN space than is optimal for a
particular application. The SCSI Host feature allows you to create a virtual private remapping of available
LUNs for a specific SCSI channel-attached host. With it, you can make devices appear to the host as if they
were at lower LUNs in order to optimize system performance.
Use SCSI Host to map partitions when a SCSI channel host is connected to
Note
the MCB SCSI port.
Depending upon host operating system constraints, it may be necessary to reboot or reconfigure the host
as a result of device map changes resulting from the use of SCSI Host.
1 Click Setup→ Device→ Access→ SCSI Host.
The SCSI Host dialog box appears.
2 Select a SCSI port to configure.
The SCSI Host dialog box appears.
3 Select a SCSI port to configure.
4 With the port selected, click LUN Mapping.
The SCSI Host Map dialog box appears.
Scalar i6000 Installation Guide 209