Checking The Accessories - Quantum Scalar i6000 Installation Manual

Checking the Accessories

The library can be ordered in different configurations. Based on your configuration, check to make certain
that the following items are included with the library and that none of them are damaged.
Libraries with native SCSI drives:
• Ordered number of SCSI LVD drives
• One terminator
• One library power cord (two power cords if you ordered redundant power supplies)
Libraries with native Fiber Channel (FC) drives:
• Ordered number of native FC drives
• One library power cord
Libraries with I/O management unit with FC drives:
• Ordered number of FC drives
• FC I/O blades (1 per 4 drives)
• Optional 2m optical cable (one per drive, connects drive to FC I/O blade)
• 30m multi-mode optical cables LC-LC (two per FC I/O blade, connects FC I/O blade to SAN)
• One library power cord
Libraries with Ethernet Expansion blades with LTO-5 drives:
• Ordered number of LTO-5 drives
• Ethernet Expansion blade (1 per 6 drives)
• One shielded Ethernet cable per drive
Library field service kit (delivered with each control module):
• Ethernet crossover cable (RJ45 to RJ45)
• Service kit
• Velcro cable clamps (3)
• Velcro hook and loop straps (2)
• Electrostatic discharge (ESD) wrist strap
Library documentation (delivered with each control module):
• CD-ROM that contains online versions of documentation
• Scalar i6000 Installation Guide (this manual)
• Scalar i6000 Unpacking Instructions
• Scalar i6000 Release Notes
10 Getting Started