Creating Partitions; Creating Partitions Automatically - Quantum Scalar i6000 Installation Manual

Table 7 Control Path Matrix
GUI Menu Path Procedure References
Setup > Device Configuring Host Access
> Access
• FC Host LUN Mapping
page 204
• LUN Mapping Wizard
page 211
Setup > Device
Configuring the SNW Host
> Access >
Device
SNW Host
Proceed to the appropriate steps.

Creating Partitions

The ability to create multiple partitions is controlled by licenses. See
have not already configured your library's licenses.
You can create partitions automatically or manually. If you choose to configure a partition manually, you can
allocate library resources to it using either Simple or Expert mode.

Creating Partitions Automatically

You can use the library's automatic mode to create partitions within limits based on licensing restrictions
and available resources. Because automatic mode is available only if no partitions currently exist, you must
first delete the default partition that was initially configured on the initial boot-up.
1 Click Setup→ Partitions→ Configure.
The Partitions dialog box appears.
182
on
on
on page 218
MCB Direct
FC I/O Blade
Connection
Connection
Enabling Licenses
LTO-5
Connection
Step 4
Step 5
on page 163 if you
Configuring the Library