Viewing Partition Details - Quantum Scalar i6000 Installation Manual

10 In the Partitions – Summary Information dialog box, verify that the parameters you set are correct.
11 To create the partition, click Create.
12 In the Partitions – Completed dialog box, review the information to make certain it is correct.
13 Optionally, click Next to identify and view the details of the drive or drives assigned to the partition.
14 In the Partitions dialog box, click Finish.

Viewing Partition Details

If you want to see settings and information for a partition but do not need to make changes, view partition
details. Unlike modifying a partition, viewing details does not require you to take a partition offline.
1 Make sure that you are viewing the physical library. From the View menu, click the name of the physical
library.
2 On the menu bar, click Monitor→ Partitions.
The Partitions Status dialog box appears with a list of all logical partitions in the library and information
about each partition.
192 Configuring the Library