Quantum Scalar i6000 Installation Manual page 155
Tape library
Hide thumbs
Also See for Scalar i6000:
- User manual (738 pages) ,
- Planning manual (92 pages) ,
- Manual (58 pages)
Table of Contents
Advertisement
Follow these instructions to bulk load the magazines.
1
From the LMC, select a partition using the View menu.
You are prompted to take the partition offline.
2
When prompted to take the partition offline, click Yes.
3
Press the Robotics Enabled button.
4
Open the access door of the control module or expansion module.
5
When you have completed your bulk load, make sure all cartridges are inserted completely.
6
Close the access door of the control module or expansion module.
7
Press the Robotics Enabled button.
8
Run the Inventory command by clicking Operations→ Inventory from the LMC.
Click OK to start the inventory. You are prompted when the inventory is complete.
You are now ready to continue installation with the instructions in
145.
Scalar i6000 Installation Guide
Setting up Your Library for Access
on page
143
Advertisement
Table of Contents
Need help?
Do you have a question about the Scalar i6000 and is the answer not in the manual?
Questions and answers