Agilent Technologies 93000 SOC Series Training Manual page 537

19-2 Histogram Setup
1. Click the Debug tab
2. Click the Histogram icon
Agilent 93000 SOC Series User Training Part 1, October 2004
Test System
If you are using on-line data as the input to the histogram tool, Agilent
SmarTest must be running and the test flow loaded on the system. Do
not execute the test flow before setting up the histogram tool as this
will initially slow down the tool when it is used. See the Results Anal-
ysis Manual, "On- Line Data" for more information.
To open and Configure the Tool
Figure 323
Figure 323 Setup Histogram Tool Overview
N O T E The set-up page will initially be displayed when the histogram tool is
opened. Until a data source is selected all the input fields will be empty.
shows an overview of using the Histogram Tool.
3. Select Data Source
4. Select Data Control Options
Histograms
5. Select Auto Adjust All
537