Agilent Technologies 93000 SOC Series Training Manual page 274

Vector and Pattern Management
with vector data
without vector data
274
The pattern master file of
files residing in the directory
../../../single_patterns/74ACT299.
The path is specified relative to the directory where the pattern master
file resides. Of course, you could also specify absolute paths.
The pattern master file must be stored in the vectors subdirectory of
the device directory.
Actually, the pattern master file allows you to address vector files in
different directories. In this case, you include more than one
"path/files" blocks in the pattern master file:
hp93000,pattern_master_file,0.1
path:
<path1>
files:
<file11>
<file12>
<file13>
. . .
path:
<path2>
files:
<file21>
<file22>
<file23>
. . .
Loading a Pattern Master File
After you have created a pattern master file you load the pattern
master file in the Data Manager. The
provides two options to "load" a pattern master file:
File - Load: You can select a pattern master file and immediately
•
download the vector data of all vector files specified in the pattern
master file.
• File -> Select Master
software establishes the links to the vector files and generates the
label list. The vector data are not downloaded.
Agilent 93000 SOC Series User Training Part 1, October 2004
Figure 177 references a number of vector
File
menu of the Data Manager
File: When you select a pattern master file the
10-3 Pattern Management