Agilent Technologies 93000 SOC Series Training Manual page 369

13-2 Identifying Failed Pins and Test Cycles (Error Map)
Agilent 93000 SOC Series User Training Part 1, October 2004
13-2 Identifying Failed Pins and Test
Cycles (Error Map)
The Error Map serves as a method of analysis for a user defined test.
The Error Map Tool enables you to set up the parameters of the error
map, for analyzing errors resulting from a test.
You launch the Error Map as follows.
1 Click on the Results tab of the main menu.
2 Double-click on the
You see the Error Map
Figure 229 Error Map
Error Map User Interface
The Error Map User Interface consists of the following sections (see
Figure 230, below):
• Menu and Icon Toolbar
Error Map icon.
(Figure 229).
Test Result Analysis
369