Agilent Technologies 93000 SOC Series Training Manual page 341

Putting It All Together
In this Lesson ...
O ve rview
The previous unit discussed the various setup files to test a device. The
actual test is set up in the Testflow Editor. Here you combine the
various setup modules in test elements to complete setups. This lesson
introduces the testflow on a level where you can set up a functional
test.
W h a t yo u w i l l l e ar n
After this lesson, you will be able to define a functional test by
combining the various setup modules in the graphical Testflow Editor.
341
Agilent 93000 SOC Series User Training Part 1, October 2004