Agilent Technologies 93000 SOC Series Training Manual page 455

16-5 Launching the Shmoo Tool
Agilent 93000 SOC Series User Training Part 1, October 2004
Spec Resources
Hardware Resources
Figure 276 Resource Browser
Device Cycle Selection
N O T E
You only have to enter an entry in this field if you have chosen a data
parameter in the Resource Entry field.
Click on the arrowhead by the Device Cycle field to display a dropdown
menu which allows. This menu provides the list of device cycles associ-
ated with the data parameter you have entered in the Resource entry
field. Select a device cycle name.
You can also type the device cycle name directly into the entry field.
N O T E
If you have chosen a combination of data parameter and device cycle to
specify a hardware resource you have to ensure that (in multi mode)
the subsequent pin selection only includes pins for which the device
cycle in the Device Cycle field is defined.
If you include a pin in the pin list which is not associated with the
selected device cycle you will get an error message.
Shmoo Tool
455