Agilent Technologies 93000 SOC Series Training Manual page 457

16-5 Launching the Shmoo Tool
Agilent 93000 SOC Series User Training Part 1, October 2004
Range and Resolution Selection
For each axis there is a resource range and resolution panel.
Type value in this field
Figure 278 Range and Resolution Selection
Click on the arrowhead by the parameter unit to display a menu of
alternative units to choose from.
Alternatively you can type the unit abbreviation directly into the box.
Resolution can also be specified as a number of measurements. Enter
the required number in the first field and instead of the units enter
Steps in the second field.
Linear/Logarithmic Scale Selection
Select either linear and logarithmic scales for each axis.
The default is linear, if a logarithmic scale is required you must click in
the selection box to obtain a check mark.
Figure 279 Linear/Log Check Box
If you choose a logarithmic scale for an axis, you must choose steps
instead of units for the resolution field. An execution time error
message will appear if you forget to do this.
Type unit - or -
click here to get the
unit menu
Shmoo Tool
457