Agilent Technologies 93000 SOC Series Training Manual page 347

12-2 Assigning the Global Setup Files
without executing test
Agilent 93000 SOC Series User Training Part 1, October 2004
Figure 218 Saving the Testflow
Loading a Testflow
To load a testflow from the device directory to the Data Manager
1 Select the Program page of the Data Manager
2 Select the Testflow icon.
3 Select File - load
You see the section box Testflow. It displays a list with the available
testflows.
4 Select a testflow and click Load.
These steps copy the testflow file from the device directory to the
temporary file
/var/opt/hp93000/soc/hp83AAAa<number>/TestFlow
It does not load the setup files to the tester!
To load the setup files to the tester without executing the test
1 Double-click the testflow icon in the Data Manger.
You see the Testflow Editor.
2 Select File - load setups
You can also execute the testflow. This automatically downloads the
setup files.
1. Select the TESTFLOW icon
2. Click LOAD
in the Data Manager.
in the Testflow Editor.
Putting It All Together
347