Standard Test Functions
start_sequencer
320
Test Control
connect
•
connect
connects the DUT to tester resources and powers it up.
disconnect
•
disconnect
disconnects the DUT from tester resources and powers it down.
Sequencer Control
• start_sequencer
starts the vector sequencer (and lets you stop it by break).
test_state
• test_state
gets the present state of the tester (running, off or break) and the
status of the PASS/ FAIL flag for all pins.
Mixed Signal Tests
The following mixed signal tests are available in this group. Refer to the
Standard Test Function Reference for test descriptions.
• DAC Tests
• Analog Continuity
• SOC DAC Linearity
• SOC DAC Distortion
• ADC Tests
• SOC ADC Linearity
• SOC ADC Distortion
• ADC TUE Linearity
Agilent 93000 SOC Series User Training Part 1, October 2004
11-2 Standard Test Function Groups