Agilent Technologies 93000 SOC Series Training Manual page 466

Shmoo Tool 16-9 Result Screen
16-9 Result Screen
Result Screen name
Each result screen has a name. This name is the name that you entered
on the corresponding setup screen in the Result Name entry field. A
screen tab is displayed at a new position for each separate result page.
To select the result screen to be viewed you have to click on the tab
with the mouse cursor.
Textual or Color Coded Result Display
You can choose to display the shmoo plot results as text and/or color
codes. The selection is made on the result screen panels shown in
Figure 286.
Figure 286 Result Display Selection Panels
The result types available correspond to the result types selected on
the setup page before the shmoo plot was executed.
Displayed Cell Size
The textual results can only be seen if the displayed cell size is physi-
cally large enough to show them, with a minimum print size of 8 pt.
Results displayed as "Pass" or "Failed" are abbreviated to "P" or "F" if
the cell is too small to display the full word.
There are also trailing "dots" (....) displayed with the text that is shown
to indicate more data is available by zooming in on the cell. If you want
to see a textual result that is not displayed, you have to zoom in on the
cells of interest so that they are large enough to contain the text.
466
Agilent 93000 SOC Series User Training Part 1, October 2004