Agilent Technologies 93000 SOC Series Training Manual page 197

9-3 Wavetable Setup
Bring up wavetable editor
Enter wavetable information
Download and save
W A R N I N G
Example wavetable
Agilent 93000 SOC Series User Training Part 1, October 2004
The following steps are required to set up a wavetable
1 Open the Data Manager and select
2 Double-click the
Timing
You see the Timing Setup window.
3 Select Select - edit wave
You see the WAVETBL_EDITOR window.
4 Either (if you are creating the first wavetable)
– click the Get Template
Or
– press Return to display the wavetables.
5 Enter the wavetable name WAVETBL gross_func_wtb.
6 Define the display mode as DISPLAY multi.
7 Enter the default device cycle DCDT.
8 Define the physical waveform indices, the drive and receive edge
actions, break waveforms and device cycle names (if required) for
every pin used.
9 When you have inputted everything you need, click DOWNLOAD.
10 Click the Timing symbol in the Data Manager and click save.
When you save the wavetable changes, only the Timing icon should be
shaded in the Data Manager. Otherwise you lose information.
The source code below shows you a simple wavetable with physical
waveforms:
Select - setup.
button.
tables.
button in the WAVETBL_EDITOR,
Timing Setup
197