Agilent Technologies 93000 SOC Series Training Manual page 49

3-1 Major Components
Agilent 93000 SOC Series User Training Part 1, October 2004
DUT Interfaces
The SOC Series can be equipped with different testheads:
• SOC specific 512 pins testhead
• SOC specific 1024 pins testhead
• F330 Style 512 pins testhead
SOC DUT Interfaces
1024 Pins (full size)
DUT
512 Pins (half size
< -120dBm Noise Floor ("true mixed signal")
Dedicated pogo locations for analog
5 x increased real estate for analog
and multi-site
Optimized ground scheme for analog
Standardized analog pin out
Figure 17 DUT Boards
Load Boards for SOC Specific Testheads
The load boards for the SOC specific testheads are characterized by the
following properties:
• Clear separation between analog and digital (lowest noise and cross
talk)
• Enough floor space on the load board for most complex mixed
signal applications with external components on the DUT board.
• Optimal layout for multi-site setups
Agilent 83000 Style DUT Interface
(Compatible for digital applications)
)
Hardware Overview
512 digital
channels
DUT
Reuse of F330 digital DUT boards
100% compatible test cell integration
49