Agilent Technologies 93000 SOC Series Training Manual page 249

9-11 Review Test
Agilent 93000 SOC Series User Training Part 1, October 2004
9-11 Review Test
1 List the four elements needed to create a timing setup.
a
b
c
d
2 Where is each timing set defined?
3 True or False. The physical waveform table specifies the edge
actions and edge delays.
4 Fill in the blanks: The 93000 test system provides _____ edges per
pin, which includes _____ drive edges and _____ receive edges.
5 Given the following waveform definition:
PINS CP
a What does "d1:0 d2:0" mean?
b What is the device cycle name?
c What is the physical waveform index?
0 "d1:0 d2:0" 0
Timing Setup
249