Agilent Technologies 93000 SOC Series Training Manual page 260

Vector and Pattern Management
Define Table Format
260
To define a display format, you click
Vector Setup Editor. You see the dialog box Define Table Format.
Figure 164 Table Format Definition
In the Define Table Format dialog box:
1 Enter a name for the new format into the format name edit field (for
example, physical).
2 Select a pin or a pin group from the list boxes labeled pinlist and
grouplist.
3 Define the columns in the vector table for the selected pin or pin
group, and mark the corresponding checkboxes in the group of
checkboxes:
– DevCyc (device cycle column: used with physical and logical
waveforms);
– D1, D2, E1, E2 (only used with logical waveforms: drive data
parameter 1, drive data parameter 2, receive data parameter 1,
receive data parameter 2).
4 Click copy.
The pin or pin group together with the defined columns appears in
the box on the right of the Define Table Format window.
Agilent 93000 SOC Series User Training Part 1, October 2004
10-2 Vector Verification
Format - Define New Format
in the