Agilent Technologies 93000 SOC Series Training Manual page 45

3-1 Major Components
Board placement
512-Pin Testhead
1024-Pin Testhead
Cardcage components
Agilent 93000 SOC Series User Training Part 1, October 2004
The cardcage contains DC/DC boards, a DPS board, channel boards
and a clock board.
N O T E
Cardcage and group numbers are not identical. Be aware of the differ-
ences in cardcage number and group number.
Figure 14 Cardcage group numbering
Digital boards can only be placed in groups1 to 3.
Analog boards can only be placed in group 8.
System configuration:
Maximum analog - 8 analog modules, 384 digital pins.
Maximum digital - no analog modules, 512 digital pins.
The 512-pin DUT board is compatible with a 1024-pin testhead.
Groups 1, 2, 3, and 8 are in the same place on the DUT board.
Digital boards can only be placed in groups 1 to 5.
Analog boards can only be placed in groups 6 to 8.
System configuration:
Maximum analog - 24 analog modules, 640 digital pins.
Maximum digital - no analog modules, 1024 digital pins
The following list provides a brief description of all components inside
a cardcage:
Hardware Overview
45