Agilent Technologies 93000 SOC Series Training Manual page 130

Defining the Pins
new atomar definition
130
3 In the Pin Group Definition Editor, click on
This brings up the Digital Pin Group Definition window
Figure 72 Elementary Pin Group Definition
Select pins 4 Select the pins you want to group from the pinlist.
You can select multiple pins with shift-click or click-drag-release
mouse operations.
If you want only a selection of all pins to be displayed in the pinlist,
you can specify a filter in the provided entry field.
5 Click
copy
If a group item is selected, the pins are inserted above this pin.
Otherwise. they are added to the end of the list.
NOTE The order of the pins is important as this governs the weight of each bit
when referring to the state of a group in the vector setup:
In the vector setup you very often specify the state of a pin group in
hexadecimal format. In this case the following rule applies:
The first pin is associated with the MSB (most significant bit) of the
state string and the last pin is associated with the LSB (least significant
bit).
6 If you need to change the order of any of the group members, do this
using the
Save 7 After the list of group members is complete, enter the group name
and press save.
Agilent 93000 SOC Series User Training Part 1, October 2004
to copy the selected pins to the list of group members.
delete and paste buttons.
7-4 Defining Pin Groups
new atomar definition.
(Figure 72).