Agilent Technologies 93000 SOC Series Training Manual page 497

18-1 Testflow Variables
Open Testflow Variables window
Define new variable
Implicit variables
Agilent 93000 SOC Series User Training Part 1, October 2004
All variables used in a testflow are handled from the Testflow Variables
window.
To invoke this window
1 Either
– select
or
– click the
.
Figure 302 Testflow Variables Window
To define a new variable
1 Click Add.
2 In the window that pops up, give the variable's type, name and
initial value.
The new variable, its initial and its current value are displayed in the
Testflow Variables window.
You can also change the initial value and the current value of variables
in the Testflow Variables window, except for the values of Implicit vari-
ables, which can only be viewed in this window.
The values for Implicit variables are set in the corresponding Assign
Value box in the testflow.
N O T E You can also use the Variables window to monitor the current values of
variables during testflow execution.
Select - Variables.
button
Advanced Testflow Control
497