Access Rights For Parameter Lists - Siemens SINAMICS S120 Function Manual

Basic functions
7.28 Web server
7.28.4.3

Access rights for parameter lists

Default rights for parameter lists
Three standard rights are specified for the user-defined parameter lists:
Standard right
C:
R:
W:
The access rights for the user-defined parameter lists are predefined as follows:
Situation:
"SINAMICS" user creates list
"Administrator" user creates list
You can change the rights of individual parameter lists based on the default settings shown
in the table.
Note
• "SINAMICS" and "Administrator" users can reduce their own rights.
• "Administrator" users can reduce the rights of "SINAMICS" users or expand them up to
their own level.
Changing access rights to parameter lists in the Web server
1. Start the Web server (see Starting the Web server (Page 399)).
2. Click the "Parameter" entry in the navigation.
The parameter display is then active on the right in the browser. The "Define" tab is
displayed.
3. Click the "Define" tab.
All parameter lists are displayed in the "List name" drop-down list.
4. Select the required individual parameter list.
398
Explanation
Change The user can create, change and delete the list.
Read The user can read the parameters from the list.
Write The user can write (and save) the parameters from the list.
"SINAMICS" rights
Change / Read
Read
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
"Administrator" rights
Change / Read / Write
Change / Read / Write
Drive functions