Siemens SINAMICS S120 Function Manual page 833

Parameter display
The parameters are selected in the BOP20 using the number. The parameter display is
reached from the operating display by pressing the "P" key. Parameters can be searched for
using the arrow keys. The parameter value is displayed by pressing the "P" key again. You
can toggle between the drive objects by simultaneously pressing the "FN" key and an arrow
key. You can toggle between "r00000" and the parameter that was last displayed by
pressing the "FN" key in the parameter display.
Figure 13-10 Parameter display
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
13.7 Parameterizing using the BOP20 (Basic Operator Panel 20)
Basic information about the drive system
833