Working With Parameter Lists - Siemens SINUMERIK Series Function Manual

Commissioning - drive-based

3.6 Working with parameter lists

3.6 Working with parameter lists
As alternative to the dialog windows, you can also configure the basic safety settings and
functions directly via a parameter list. The parameter list can be called from the dialog window
of the particular safety basic setting or safety function.
Figure 3-1
A minimum of 2 sublists are displayed in the list window:
● Upper list = data from the 1st monitoring channel
● Lower list = data from the 2nd monitoring channel
If parameters or drive machine data are not assigned to the 1st or 2nd monitoring channel,
they are displayed in a 3rd list below the list for the two monitoring channels.
The following data are displayed in the individual columns of each list:
● Parameter No.
● Parameter name
● Input field (white)
For r parameters, only values are displayed (= display field).
● Units
56
Example of a parameter list
Function Manual, 10/2015, 6FC5397-3EP40-5BA3
Safety Integrated