Basic functions
7.19 Tolerant encoder monitoring
7.19.13
Tolerance window and correction
Figure 7-10
Tolerance window and correction
7.19.14
Dependencies
Table legend:
1. Encoder track monitoring
2. Zero mark tolerance
3. Freezing the speed setpoint
4. Adjustable hardware filter
5. The measuring time can be set to evaluate zero speed
6. Sliding averaging of the speed actual value
7. Edge evaluation of the zero mark
8. Signal edge evaluation (1x, 4x)
9. Pole position adaptation
10.Pulse number correction in the event of faults (pole position for commutation is also
corrected)
11."Tolerance band pulse number" monitoring
346
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Drive functions