Configuring know-how protection
Make the settings for the know-how protection on the "Drive unit know-how protection" tab.
1. Click the "Drive unit know-how protection" tab.
2. If you want to store with protection, activate one of the following options with a mouse
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
Figure 13-33 Load to file system know-how protection
By default, the "Without know-how protection" option is active. If you really want to store
the data without protection (not recommended), you can exit the dialog box with "OK" or
"Cancel" at this point.
click:
– "Know-how prot. without copy prot."
Required inputs: "New password" and "Confirm password"
– "Know-how protection with basic copy protection (permanently linked to the memory
card)"
Required inputs: "New password", "Confirm password" and "Memory card specified
serial number"
– "Know-how protection with extended copy protection (permanently linked to the
memory card and CU)"
Required inputs: "New password", "Confirm password" "Memory card specified serial
number" and "Control unit specified serial number"
Basic information about the drive system
13.15 Write and know-how protection
907