Function modules
8.9 Master/slave function for Active Infeed
Parameter p3422 (C
closed-loop control can be directly adjusted via this parameter when the master/slave
configuration changes, instead of changing the proportional gain of the V
(p3560). When parameter p3422 changes, parameter p3560 is recomputed automatically by
the firmware.
Figure 8-24
Structogram of master/slave operation, three identical Active Line Modules (ALMs) of identical output rating,
PROFIBUS communication system
514
capacitance) can be changed in operation. This means that the
DC link
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
controller
DC link
Drive functions