Siemens SINAMICS S120 Function Manual page 737

Example: Two controllers in a common project
Start STEP 7:
1. Under S7, create a drive control for the new project, in the example called A-CPU, based
2. In HW Config, select the CPU 315-2 PN/DP controller and connect the PROFINET IO as
Figure 11-40 Drive control created in HW Config
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
on a SIMATIC 300.
Figure 11-39 Creating a new S7 project
the communication network.
Select an S120 as drive control (in the example a CU320-2 PN).
11.3 Communication via PROFINET IO
Communication
737