Displaying Faults And Alarms - Siemens SINAMICS S120 Function Manual

7.28.8.2

Displaying faults and alarms

You can display and acknowledge the current faults and alarms with the aid of the Web
server.
Displaying alarm messages
1. Click the "Messages and Logs" entry in the navigation.
2. Click the "Alarms drive" tab.
Figure 7-36
3. Click "Reset alarms".
Drive functions
Function Manual, (FH1), 04/2014, 6SL3097-4AB00-0BP4
The current faults and alarms of the drive object are then displayed on the "Alarms drive"
tab.
Displaying alarm messages
The following information is displayed:
Column Explanation
Time Time of the event
Type Type of the event
Drive object Relevant drive object
Alarm Alarm ID (alarm value) with description
Component Number of the relevant component
The display of the faults and alarms is not updated automatically.
The alarms are acknowledged. The display of the "Alarms drive" tab is updated.
Basic functions
7.28 Web server
409